Do you need professional help in cleaning your commercial carpets or rugs?

We’re top commercial carpet cleaning service and we have a few tips and tricks to share.

You Can Now Add Muscle To Your Carpet Cleaning Routine

Commercial carpets require three types of basic care:

Weekly vacuuming, steam cleaning regularly and spot treatments on occasion.

You can make your interiors healthier and fresher by using our tips and tricks.

1. Vacuum Maintenance & Techniques

Start pushing as soon as you plug it in and turn it on. Results are immediately visible. You don’t even see it, but your carpet is losing years of its life and beauty. Your vacuum cannot do everything by itself. Your vacuum needs your help.

* Always Start Fresh

It’s not cost-effective to run the vacuum cleaner with a bag that is half full. The equipment will work harder. This reduces the mechanical life and leaves dirt on carpets.

* Fit the Carpet

Then, turn the vacuum on at full power. Reduce the cleaner head by adjusting it one at a time, until the cleaner head hugs the carpet.

* Take Your Time

The vacuum’s suction power is greatly reduced when it is rushed across carpet. It is more efficient to slow down because a single pass of the carpets with a relaxed pace will pick up more dirt. Double-pass areas that are heavily trafficked using the same method.

2. Steam Clean Outside Manual

We can understand the DIY steam cleaning approach. You can rent a steam cleaner and read the instructions, but it’s not as simple as that. We are happy to offer our professional advice.

* It’s Not a Vacuum Cleaner

Steam cleaning carpets requires that you first vacuum the carpet. If you don’t, the process will turn dirt into micro-mud that is pushed through the fibers and padding. Use a mild detergent solution and hot water to pre-treat areas that are subjected to heavy traffic. Spray on the solution and allow it to sit for 10 minutes.

* Count Your Passes

Steam cleaning uses water to remove dirt and not to soak carpets. Use detergent and water to clean the area. Then, rinse the area with neutralizing rinse. Three passes of drying is all that’s needed, then 12 hours to open the area for foot traffic.

3. The Spot Removal Process Requires Gentle Touch

The difference between a spot and a stain is time. As soon as a coffee stain hits your carpet, it begins to oxidize and become fibers. Spot cleaning should be done quickly, but gently.

* Know Your Spots

You can clean up some spills with soda water, while others are cleaned by diluting vinegar. Save several online resources as quick guides for when you need to handle something unusual.

* Work with Less

Do not saturate a spot, whether you are using a solution from the hardware shop or if you have made your own. If you soak a spill, it will spread the residue to fibers. Instead, use a quick spray.

* Do not Rub It in

Scrubbing an spill will push it deeper into the carpet, beyond your DIY reach. With an absorbent towel, gently blot the area inwards from the outer edge. As the blotter picks up spills, change it out and repeat as needed.

Three Additional Carpet Cleaning Tips From Our Pros

You’re now ready to learn more about professional Carpet Cleaning in Adelaide. These tips will ensure that your hard work is rewarded with beautiful carpets.

1. Pre-Vac before Cleaning

Vacuum carpets first before steam cleaning. This first pass allows for a more thorough deep cleaning.

2. Take it easy with the pre-spray

Pre-spray treatments can make cleaning a commercial carpet easier. Too much can leave a sticky residue, which makes the job more difficult.

3. Beware of Reappearing Stains

It’s more common than you might think. Watch out for stubborn stains trying to creep back into areas that have been cleaned recently.

How to Clean Commercial Carpet Tiles

Commercial carpet tiles are stain resistant and durable. They’re a great choice for commercial flooring. Deep clean the carpet tiles according to their fiber type.

• Steam cleaning is recommended for nylon and polyester tiles once a year.
• Professional cleaning of wool fiber tiles is required using dry extraction methods.
• You can spot clean individual tiles with a mild detergent and cool water.
• Before reinstalling, make sure that the tiles have completely dried on both sides.

How to Clean Glue down Carpet

Commercial glue-down carpeting can be difficult to clean because the backing is stuck to concrete or wood.

If you clean these surfaces with too much water, they can rot or mold.

• Consult the carpet manufacturer to find out what cleaning methods they recommend.
• Ask a commercial cleaner for assistance if you cannot find the information on your CGD carpet.
• Carpets with most stains can be cleaned by spot cleaning, but require annual dry cleaning.
• The best way to clean carpets that are glued down is to hire a professional technician.

Professional Carpet Cleaning: Benefits

Professional cleaners do the job quickly and efficiently. Here are a few of the powerful tools that cleaning technicians use on a daily basis.

* Truck-Mounted Exctraction Systems

The truck-mounted water heaters, extraction equipment and carpet cleaning system of this effective carpet cleaning solution can handle large jobs.

* Portable Hot Water Extractors

The smaller units are designed to reach areas where larger systems can’t.

* Air Movers and Carpet Driers

Carpet drying equipment creates a high-velocity flow of air across the floor and allows freshly cleaned commercial carpets to be put back into action quickly.

Commercial Carpet Cleaning, IL is our specialty

Commercial carpet cleaning will help you to maintain your floors. We will give your flooring years more life and performance. Call us today to learn more about our commercial cleaners.